The threshold, not the ladder
An inclusion is an internal characteristic formed while the stone grew. Nearly every diamond has them, mined or lab-grown, and the clarity grade describes what a trained grader sees under ten times magnification.
You are not a grader and you will not be carrying a loupe. So the question that matters is simpler than the scale implies. What is an eye clean diamond: one with no inclusion visible to a normal person, with normal eyesight, at normal viewing distance. That is it.
Eye-clean is binary. Once a stone is over the line, a higher clarity grade improves the certificate and changes nothing you will ever see. That is where a great deal of money goes quietly.
Position beats size
The thing almost nobody is told.
An inclusion directly beneath the table — the large flat facet on top — sits in the stone's most visible real estate and is working against you. The same inclusion near the girdle, at the edge, may end up under a claw and be gone forever.
So a stone with several small characteristics scattered near the edge can be more eye-clean than a stone with one slightly larger characteristic in the middle, despite a worse grade on paper. This is routine rather than exotic, and it is the main reason stones should be looked at rather than filtered.
Reflection matters too. A characteristic near a facet junction can bounce and appear in several places at once, which is more noticeable than its size suggests. Again, not predictable from the grade.
Type matters as much as grade
Inclusions are not all equally visible. A small white or transparent characteristic can be genuinely difficult to see even at a moderate grade. A dark one of the same size announces itself, because the contrast is what the eye catches.
Clarity grading accounts for this to a degree. It does not account for it completely, which is why two stones at the same grade can differ in how much you notice.
There is also a structural question hiding inside the cosmetic one. A characteristic reaching the surface at a vulnerable point — particularly near the girdle, where the stone is thin and takes knocks — is worth asking about. This is uncommon and it is not the same conversation as whether a stone looks clean.
Which grades usually clear the line
Broadly, and with the whole point of this entry being that it varies by stone: the top grades are eye-clean without exception, the upper-middle grades are eye-clean in the great majority of cases, and the middle of the scale is where it becomes genuinely stone-by-stone — many qualify, some do not, and the grade alone will not tell you which.
Size changes where the line falls. The larger the stone, the larger everything inside it, so a grade that is reliably eye-clean at a modest size is less reliably so at twice the weight. If you are buying larger, be more conservative or look harder.
How to check, in ten seconds
Hold the stone about a foot from your face, in ordinary light rather than a spotlight, and look straight down through the table.
If you see nothing, it is eye-clean for you, and that is the only verdict that matters. Do not then go looking with magnification, because you will find something, and you will not be able to stop seeing it afterwards.
If you are buying remotely, ask for the plotted diagram on the report and ask specifically whether anything sits under the table. Anyone competent can answer that in a sentence. Reading the report covers what else the diagram tells you.
Where the money should go instead
Once a stone is eye-clean, further clarity is the least productive place left to spend.
Cut is the most productive, by a wide margin, and it is the one grade that cannot be compensated for later. A beautifully cut eye-clean stone outperforms a flawless mediocre one in every condition a person will ever see it in. The four Cs entry argues the same priority across all four.
The setting matters too, and in a way that interacts with this. Claws cover parts of the stone, which can hide a characteristic near the edge entirely — a legitimate solution rather than a trick, provided everyone involved knows that is what is happening.
Does any of this change for lab-grown
No. Lab-grown diamonds have inclusions, they are graded on the same scale by the same laboratories, and eye-clean means the same thing.
The useful difference is budgetary. At a given price the lab-grown option usually puts a better cut grade within reach, which is exactly where the clarity money is best redirected to.
How it is handled here
For a biological commission the specification is agreed at consultation before growth begins, so clarity is a decision taken in advance rather than a selection made at the end. Our recommendation is consistent and slightly boring: specify to eye-clean, not beyond it, and put the difference into cut.
For a Custom stone, which is conventionally sourced with no biological contribution, there is a shortlist and the stone can be looked at properly before anything is set. Tell us the budget and we will tell you where we would spend it.